Waterjet cutting abrasives
-
PHA-001 · AbrasivesHard Rock Garnet Abrasive Mesh 80Per ton · quote Get a quote - PHA-002 · AbrasivesHard Rock Garnet Abrasive Mesh 120Per ton · quote Get a quote
-
PHA-003 · AbrasivesHigh Performance Garnet Abrasive Mesh 80Per ton · quote Get a quote -
PHA-004 · AbrasivesHigh Performance Garnet Abrasive Mesh 120Per ton · quote Get a quote
No products match these filters. or .
Controlled grain-size garnet abrasive for waterjet cutting, in 25 kg bags: Hard Rock (mesh 80 and 120) and High Performance (mesh 80 and 120).
How to choose
- Mesh 80: general purpose, higher cutting speed.
- Mesh 120: finer grain, better edge finish.
- Damp or dusty abrasive clogs the mixing tube: store it in a dry place.
Frequently asked questions
Which abrasive mesh should I use for waterjet cutting?
Mesh 80 is the most common: it balances cutting speed and edge finish on most metals and stone. Mesh 120 has a finer grain, for better edge quality and thin parts, with slightly slower cutting.
When should I replace the mixing tube?
When the tube bore wears, the jet widens, the kerf grows and the cut loses accuracy. Measure the exit bore periodically and replace the tube once it exceeds your process tolerance to avoid rework.
Why filter the pump feed water?
Particles in the feed water wear seals, valves and the ruby orifice. Staged filtration (5 µm, 1 µm and 0.45 µm, with activated carbon when needed) extends the life of high-pressure components.
Can't find the part?
Send us the part number, the machine brand or a photo of the part. We will locate it and quote.